The Ultimate Ceramic Tile cleaner. White’n Light’n removes mildew stains, soap film, and scum from the tile while whitening grout. Easy to use, just spray on full strength, wipe with a brush or pad, then rinse.

• Fresh Lemon Scent
• RTU - No Mixing
• Removes Mold & Mildew Stains
• Out Performs All Others

WHITE LIGHT’N Plus
uses an inhibited hydrochloric acid and degreasing surfactants, to rejuvenate
tile and grout to its original appearance.
WHITE LIGHT’N Plus
is not corrosive to skin. Common commercial products contain harmful
chemicals (phosphoric acid, caustic soda and bleach)
WHITE LIGHT’N Plus

• DOES NOT CONTAIN bleach, caustic soda or phosphoric acid
• Not corrosive to skin.
• No noxious odor.
• Low VOC with no harmful fumes.
• Non abrasive to fragile surfaces like granite & marble

WHITE LIGHT’N Plus
can also be used as a tub & tile cleaner, toilet bowl cleaner, lime scale
remover, rust stain remover, and a vinyl and aluminum siding cleaner.

Use in well-ventilated areas: Avoid prolonged breathing of vapors.
Attach sprayer to bottle, turn sprayer nozzle to adjust spray pattern.
TO REMOVE MILDEW STAINS FROM ALGAE, MOLD, MILDEW OR
OTHER NON-PUBLIC HEALTH ORGANISMS: Spray, wait a few minutes
until stains disappear, then rinse. Repeat if needed.
TO CLEAN SOAP FILM: Spray, wait a few minutes and wipe with a
sponge.
Deep mildew stains may need two applications. A heavy build-up of
soap scum or hard water deposits should be removed first.
Use only in well ventilated areas. To reduce potential exposure to
fumes when applying with a sprayer, do not use fine mist. Can also
be applied with a sponge. Always wear protective gloves.
AREAS OF USE: In shower rooms, around swimming pools, tubs, on
grouting, ceramic tile, fiberglass shower, vinyl bathmats and shower
curtains.
Rinse immediately after use on rubber, plastic, and vinyl. Do not use
on wood or painted surfaces. Avoid contact with noncolorfast surfaces,
fabric, clothes and aluminum.